Cleaning & Sanitation
Description
Integrated Treatment from Source to Distribution
A reverse osmosis system is one part of a complete water treatment process. Pretreatment protects the membranes, while post-treatment, storage, and distribution equipment help ensure the finished water meets the application requirements. MCI WET can integrate the entire treatment train, from source-water pumps through final distribution.
A single master controller coordinates pretreatment, reverse osmosis, post-treatment, storage, and distribution as one system. This integrated approach gives operators one interface for monitoring and control while providing single-source accountability for the complete water treatment process.
Pretreatment Equipment
- Source-water and well pumps
- Multimedia filtration systems
- Water softening systems
- Chemical dosing systems
Post-Treatment Equipment
- pH adjustment systems
- Remineralization systems
- Chlorination and disinfection
- High-purity water polishing
- Finished-water storage tanks
- Distribution pump systems
MCI WET engineers integrated water treatment systems for applications ranging from laboratory installations to municipal plants. Each system is designed around the source-water analysis, production capacity, and required finished-water quality.
Pretreatment design directly affects membrane cleaning frequency, replacement intervals, and operating cost. MCI WET selects filtration, softening, and chemical dosing equipment around the water conditions and practical maintenance requirements.
MCI WET Remote Intelligence provides cloud-based dashboards, operating trends, and early-warning indicators across the treatment train. Operators can monitor critical conditions from one interface and identify changes before production is affected.
Systems are assembled, skid-mounted, pre-plumbed, prewired, and tested at our Dallas facility. Coordinating fabrication, controls, system integration, and testing under one roof supports consistent quality and single-source accountability.
Protect RO Membranes with Proper Cleaning
Protect RO Membranes with Proper Cleaning
Routine membrane cleaning helps restore reverse osmosis performance, reduce avoidable production losses, and extend membrane service life. A properly sized cleaning system allows operators to follow consistent procedures before fouling causes a significant decline in flow or product-water quality.
MCI WET membrane cleaning systems are sized for the RO equipment they serve. Available configurations include graduated tanks for accurate batch preparation, wetted components rated from pH 1 to 12 at 131°F, and quick-disconnect connections for faster setup. Each system is assembled and tested at our Dallas facility.
What Makes Membrane Cleaning Effective
Correct flow, chemical compatibility, and operator-friendly features support consistent RO membrane cleaning.
Correct Flow for the RO System
Cleaning flow must match the membrane and vessel configuration. MCI WET offers four standard models from 8 to 80 GPM for RO systems from 4,000 to 110,000 GPD. Models support configurations ranging from one 4-inch vessel to two 8-inch vessels with up to eighteen 8-inch membrane elements. Custom systems are available for larger plants.
Chemical and Temperature Compatibility
Acid and caustic cleaning solutions require compatible tanks, pumps, seals, piping, and fittings. MCI WET cleaning systems are rated for solutions from pH 1 to 12 at 131°F. Corrosion-resistant aluminum frames and 5-micron prefilters help protect the equipment while capturing material removed from the membranes.
Designed for Routine Operation
Graduated tanks marked in 5-gallon increments support accurate batch preparation. Quick-disconnect connections simplify setup, a discharge pressure gauge helps operators monitor the cleaning cycle, and casters make the system easier to position. Initial chemicals and written operating instructions are included to support startup.
RO Membrane Cleaning Systems Built in Dallas
Designed, assembled, and tested by the team that builds MCI WET reverse osmosis systems.
MCI WET engineers membrane cleaning systems around the RO capacity, vessel configuration, membrane count, and required cleaning flow. Matching the cleaning equipment to the RO system supports consistent circulation across the membrane surfaces.
Fabrication, assembly, quality control, and testing are coordinated at our Dallas facility. Each cleaning system is checked before shipment to confirm that the components and completed assembly align with the approved design.
MCI maintains direct relationships with manufacturers of the pumps, motors, and other components used in our equipment. These relationships help support replacement-parts availability and technical assistance throughout the cleaning system’s service life.
Product Specifications
| SY04MS8 | SY04MS16 | SY04MS40 | SY04MS80 | |
|---|---|---|---|---|
| Pump Capacity (@ 48 PSI) | 8 GPM | 16 GPM | 40 GPM | 80 GPM |
| Motor | .75 HP | 1.5 HP | 2.5 HP | 3 HP |
| Parallel Vessel Capacity | One 4" | Two 4" | One 8" | Two 8" |
| Membrane Capacity | Fifteen 4" | Thirty 4" | Eighteen 8" | Eighteen 8" |
| Filter | One 4.5" x 10" | One 4.5" x 20" | Two 4.5" x 20" | Two bag filter |
| Tank Capacity | 35 gal / 133 L | 55 gal / 209 L | 165 gal / 627 L | 165 gal / 627 L |
| Tank Dimensions (Dia. x Height) | 18" x 33" | 22" x 36" | 31" x 55" | 31" x 55" |
| Frame Weight | 75 lb / 34 kg | 90 lb / 41 kg | 105 lb / 48 kg | 105 lb / 48 kg |
Common to All Models
-
Designed For
RO units from 4,000 GPD to 110,000 GPD (15.14 to 416.40 m3/d)
-
Also Used For
Mixing and dispensing sanitizing chemicals for piping loops, tanks, and process equipment
-
Frame
Corrosion resistant aluminum
-
Pre-Filtration
5 micron pre-filter
-
Solution Compatibility
pH range of 1 to 12 at 131°F
-
Tank
Graduated in 5 gallon increments for batch measuring
-
Connections
Quick disconnects
-
Controls
NEMA-4X
-
Motor Protection
Internal overload protection
-
Included
Initial cleaning chemicals, complete and comprehensive instructions
-
Optional
In-tank mixer, immersion heater, specific power requirements, temperature gauge, custom designs for larger systems, additional cleaning, sanitizing, or preserving chemicals
NEED A MEMBRANE CLEANING SYSTEM?
Protect Your RO Membrane Investment
Share your RO capacity, vessel configuration, membrane count, and cleaning requirements with MCI WET. Our team will help select or engineer a membrane cleaning system with the appropriate flow, chemical compatibility, and operating features.
DISCUSS YOUR PROJECT