Light Duty Commercial Reverse Osmosis
Description
Light Commercial Reverse Osmosis Systems
MCI WET light commercial reverse osmosis systems reduce dissolved solids and improve water quality for offices, small businesses, and other commercial applications requiring a dependable source of treated water.
Each system is selected around the source-water analysis, required production capacity, operating schedule, available space, and intended use. This application-specific approach helps ensure the equipment is properly sized for the facility’s water quality, daily demand, and peak-use requirements.
MCI WET evaluates membrane selection, pretreatment, storage, distribution, and system controls as part of the complete commercial water treatment process. Components are configured to support efficient operation, straightforward maintenance, and consistent water production.
Systems are assembled and tested at our Dallas facility. Direct relationships with component manufacturers also help MCI WET provide replacement parts and technical support throughout the system’s service life.
Light Commercial Reverse Osmosis Features and Capacities
- Commercial-grade reverse osmosis membrane elements
- GRO Series with 2.5-inch membranes and capacities from 150 to 700 GPD
- ES Series with 4-inch membranes and capacities from 1,600 to 9,600 GPD
- Fully functional base systems with optional monitoring and control upgrades
- Corrosion-resistant frames and stainless steel pumps on applicable models
- Heavy-duty FRP pressure vessels on 4-inch models
- Recirculation loop designed to support higher recovery
- Low-pressure protection and automatic feedwater shutoff
- TDS monitoring, automatic restart, and pretreatment lockout on ES-1600 and larger models
- Assembled and performance tested before shipment
- Optional MCI WET Remote Intelligence monitoring
MCI WET assembles and tests light commercial reverse osmosis systems at our Dallas facility. Coordinating system integration, performance testing, and technical support under one roof helps maintain consistent quality and single-source accountability.
Share your source-water analysis, production requirements, operating schedule, available space, and application goals. MCI WET will help select a GRO or ES Series system and configure the pretreatment, storage, monitoring, and controls required for your commercial application.
Light Commercial RO Systems Built in Dallas
Light Commercial RO Systems Built in Dallas
MCI WET builds GRO and ES Series light commercial reverse osmosis systems for offices, small businesses, and other applications requiring a dependable source of treated water. Available models provide production capacities ranging from 150 to 9,600 gallons per day.
System assembly, control-panel manufacturing, robotic welding and bending, stainless steel fabrication, and quality control are coordinated at our Dallas facility. This integrated approach supports consistent construction and single-source accountability across standard and configured systems.
Each system is performance tested before shipment and configured around the source-water quality, production requirements, available space, and operating conditions of the commercial application.
How to Select a Light Commercial RO System
Compare production capacity, feedwater requirements, maintenance needs, and available support when selecting a light commercial reverse osmosis system.
What Production Capacity Is Required?
GRO Series systems use 2.5-inch membrane elements and produce 150 to 700 gallons per day for lower-demand commercial applications. ES Series systems use 4-inch membrane elements and produce 1,600 to 9,600 gallons per day for facilities with greater daily or peak demand. MCI WET evaluates water use and operating requirements to help select the appropriate series, model, and capacity.
What Feedwater Conditions Are Required?
GRO and ES Series systems are designed for feedwater containing up to 1,000 ppm TDS, turbidity below 1 NTU, SDI below 5, and no chlorine. Chlorinated water requires carbon pretreatment to protect the thin-film composite membranes. MCI WET reviews the source-water analysis before recommending the system, pretreatment, and operating configuration.
How Are the Systems Maintained and Supported?
GRO and ES Series systems use standard 2.5-inch or 4-inch membrane elements and standard 5-micron filter cartridges to simplify routine replacement. Accessible gauges, flow indicators, and sample ports support system inspection and maintenance. MCI WET provides replacement parts and technical support, with optional Remote Intelligence monitoring for cloud-based dashboards and performance trends.
In-House Manufacturing for Commercial RO
GRO and ES Series systems are built, integrated, and performance tested under one roof.
MCI WET builds GRO and ES Series light commercial reverse osmosis systems at our Dallas manufacturing facility. Stainless steel and PVC fabrication, robotic welding and bending, system assembly, and quality control are coordinated within the same operation.
Control panels are engineered and built by MCI at the same facility. Keeping fabrication, controls, and system integration within one organization supports consistent construction and provides a single source for the complete commercial RO system.
Every GRO and ES Series system is assembled and performance tested before shipment. MCI WET also provides replacement parts and technical support to help commercial customers maintain dependable water production throughout the system’s service life.
Product Specs
-
Models
GRO-150, GRO-250, GRO-500, GRO-700, ES-1600, ES-3200, ES-4800, ES-6400, ES-8000, ES-9600
-
Capacity
150 to 9,600 GPD (0.6 to 36.4 m³/day)
-
Product Flow
0.10 to 6.66 GPM
-
Reject Flow
0.23 to 4.40 GPM
-
Recovery Rate
30% to 65%, by model
-
Membrane Quantity
1 to 6, by model
-
Membrane Size
2.5" x 14" or 2.5" x 21" on GRO models, 4" x 40" on ES models
-
Pump
1/3 HP on GRO models, 3/4 to 1.5 HP on ES models
-
Inlet Connection
3/8" on GRO models, 3/4" to 1" on ES models
-
Product Connection
1/4" on GRO models, 1/2" on ES models
-
Reject Connection
1/4" on GRO models, 1/2" on ES models
-
Weight
40 to 66 lb (18 to 30 kg) on GRO models, 180 to 280 lb (82 to 127 kg) on ES models
-
Dimensions
20" x 30" x 20" to 20" x 30" x 21" on GRO models, 44" x 44" x 68" on ES models
-
Packaging
Carton on GRO models, pallet on ES models
-
Membranes
Thin film composite
-
Pressure Vessels
Heavy duty fiberglass on 4" models
-
Pumps
Rotary vane or multi-stage stainless steel centrifugal, by model
-
Pre-Filter
5 micron sediment
-
Standard Features
Corrosion resistant frame, automatic feed water shutoff valve, manual feed water shutoff valve, product water check valve, heavy duty concentrate control valve, recirculation loop, pump pressure gauge, pre-filter pressure gauges, low pressure protection, sample ports, polyethylene or polypropylene product plumbing
-
Standard on ES-1600 and Up
Product and reject flowmeters, pretreatment lockout, auto restart, digital TDS monitor
-
Rated Conditions
Output based on 60Hz power, 70°F, up to 1,000 mg/L TDS, 8.0 pH
-
Feed Water Requirements
Low fouling potential, up to 1,000 ppm TDS, turbidity under 1 NTU, SDI under 5, zero chlorine
NEED HELP SELECTING A SYSTEM?
Choose Your Commercial RO System
Share your source-water analysis, daily and peak production requirements, available space, operating schedule, and intended use with MCI WET. Our team will help select the appropriate GRO or ES Series commercial reverse osmosis system and identify the pretreatment, storage, monitoring, and controls needed to support reliable water production at your facility.
FIND YOUR SYSTEM