Skip to main content

Light Commercial Desalination System

Description

Compact Seawater Desalination

The MCI WET LC Series converts seawater into fresh water for small resorts, beach homes, remote facilities, and other locations without reliable access to freshwater. Four models provide production capacities ranging from 1,300 to 5,000 gallons per day.

Each system is delivered as an assembled treatment skid with a separate high-pressure pump skid, reducing field assembly and installation requirements. Every unit is engineered, fabricated, assembled, and tested at MCI WET’s facility in Dallas, Texas, before shipment.

All four models share the same footprint and use a 7.5-horsepower high-pressure pump, simplifying space planning and electrical requirements across the product line. Standard 4-inch membrane elements support straightforward service and replacement, while the largest model weighs only 456 pounds.

Fully automatic controls start and stop the system using a signal from the storage-tank level sensor. An automatic permeate-flush cycle helps protect the membranes and support longer service life.

MCI WET can also provide feed pumps, media filtration, chemical dosing systems, and other ancillary equipment based on the source-water quality and site requirements. Our engineering team can evaluate the application and configure a complete seawater treatment solution for the project.

SPEAK TO AN EXPERT
Write a Review

Key Features

  • Four models with capacities from 1,300 to 5,000 GPD (4.9 to 19.0 m³/day)
  • Fully automatic operation using a single storage-tank level signal
  • Compatible with seawater wells and open-intake sources
  • Optional ancillary equipment available for a complete system
  • MCI WET Remote Intelligence monitoring available
  • Consistent footprint and 7.5-horsepower pump across all four models
  • Standard 4-by-40-inch membrane elements, with one to four membranes depending on the model
  • Compact system skid with a separate high-pressure pump skid
  • Remote Intelligence monitoring platform

MCI WET equipment is fabricated, assembled, and tested at our advanced industrial manufacturing facility in Dallas. Keeping key capabilities in-house supports consistent quality, reliable production, and single-point accountability.

Bring MCI WET your water challenge. Our team will develop a sound, engineered solution designed, fabricated, and tested under one roof.

Compact System. Full-Scale Standards.

Light Commercial Desalination System

Compact System. Full-Scale Standards.

The MCI WET LC Series is built to the same exacting standards as our larger municipal and industrial water treatment systems. Each unit is fabricated and assembled in Dallas using advanced manufacturing capabilities, including robotic welding and bending, with quality control maintained throughout production.

MCI WET coordinates design, fabrication, control panel manufacturing, assembly, and testing under one roof. This integrated approach provides single-source accountability from engineering through long-term support.

In-House Fabrication
MCI-Built Control Panels
Robotic Welding & Bending
Single-Source Support

Choosing a Light Commercial Seawater Desalination System

A dependable light commercial reverse osmosis system should be easy to size, operate, and maintain. These three factors can help you select the right seawater desalination system for your site.

Capacity and Recovery

The MCI WET LC Series includes four models producing 1,300 to 5,000 GPD (4.9 to 19.0 m³/day), supporting applications from beach homes to small resorts. Each model uses the same 8.8 GPM feed flow, simplifying intake, prefiltration, and discharge sizing. Recovery ranges from 10% to 40%, depending on the model.

Automatic Operation

A single storage-tank level signal starts and stops the LC system automatically. MCI WET Remote Intelligence provides cloud-based dashboards and trend data to help operators identify performance changes early.

Standard, Serviceable Components

All LC models use the same 7.5-horsepower high-pressure pump and standard 4-by-40-inch membrane elements. The compact system measures 36 by 19 by 71 inches and weighs no more than 456 pounds, simplifying installation, maintenance, and replacement-parts planning.

Light Commercial Desalination Systems Built In-House

Designed, fabricated, and tested by one team in Dallas.

MCI WET fabricates both LC skids in-house using robotic welding and bending. This controlled process maintains a consistent 36-by-19-by-71-inch footprint and repeatable quality across every model.

Control panels are engineered and built at the same Dallas facility. Each LC system is assembled and fully tested before shipment, providing single-source accountability from design through long-term support.

In-House Skid Fabrication
MCI-Built Control Panels
Integrated Quality Control
Robotic Welding & Bending

Product Specs

  • Models
    SW-LC1.3K, SW-LC2.6K, SW-LC3.6K, SW-LC5K
  • Capacity
    1,300 to 5,000 GPD (4.9 to 19.0 m³/day)
  • Feed Water Source
    Well or open intake
  • Product Flow
    0.9 to 3.5 GPM
  • Feed Flow
    8.8 GPM, all models
  • Reject Flow
    5.2 to 7.8 GPM
  • Standard Recovery
    10% to 40%
  • Membrane Quantity
    1 to 4, by model
  • Membrane Size
    4" x 40"
  • High Pressure Pump
    7.5 HP, all models, mounted on a separate skid
  • Pump Skid Dimensions
    27" L x 16" W x 18" H (69 x 40 x 46 cm)
  • System Dimensions
    36" L x 19" W x 71" H (91 x 48 x 180 cm), all models
  • Weight
    330 to 456 lb (150 to 205 kg)
  • Feed Connection
    3/4"
  • Product Connection
    1/2"
  • Reject Connection
    3/4"
  • Controls
    Fully automatic, on and off from a storage tank level sensor
  • Rated Conditions
    Output based on 35,000 mg/L TDS at 77°F (25°C)
  • Optional Ancillary Equipment
    Feed pump, multimedia filtration, chlorine injection, pH adjustment, corrosion inhibitor injection, inline carbon filter for permeate flush, level sensor, distribution system

READY TO PLAN YOUR SYSTEM?

Find the Right Light Commercial Desalination System

Share your source water, capacity needs, site conditions, and operating goals. MCI WET will help select the right LC Series system and ancillary equipment for reliable seawater desalination.

SPEAK TO AN EXPERT