Skip to main content

Seawater Desalination Systems

Description

Custom-Engineered Seawater Desalination Systems

The MCI WET SW Series uses reverse osmosis to convert seawater into fresh, potable water for resorts, municipal water supplies, and industrial facilities. Each seawater desalination system is engineered to order based on source-water quality, site conditions, production capacity, operating requirements, and long-term service needs.

Project-specific engineering allows MCI WET to select the right energy-recovery technology, materials, and ancillary equipment for each application. Every system is designed to reduce energy use, simplify maintenance, and support reliable operation throughout its lifecycle. Some MCI WET systems remain in service after more than 25 years.

MCI WET Remote Intelligence provides cloud-based dashboards and trend data, helping operators monitor system performance and identify changes before they affect water production.

SPEAK TO AN EXPERT
Write a Review

Key Features

  • Engineered to order for source-water quality, site conditions, and capacity requirements
  • Application-specific energy recovery to help reduce operating costs
  • In-house super duplex stainless steel pipe fabrication
  • Powder-coated, marine-grade aluminum frames
  • Stainless steel hardware
  • Automatic permeate flush system
  • Semi-automatic membrane clean-in-place (CIP) system
  • Ancillary equipment available for a complete treatment system
  • UL listed control and power panels
  • MCI WET Remote Intelligence monitoring available

MCI WET seawater desalination systems are fabricated, assembled, and tested at our advanced manufacturing facility in Dallas. Keeping key capabilities in-house supports consistent quality, coordinated production, and single-source accountability.

Bring MCI WET your water challenge. Our team will engineer a complete solution around your source water, site conditions, capacity requirements, and long-term operating goals.

Engineered for the Hardest Water There Is

WET seawater desalination system

Engineered for High-Salinity Seawater Treatment

Seawater desalination requires equipment designed for high salinity, operating pressure, and corrosion. MCI WET engineers each SW Series system around source-water quality, site conditions, required capacity, and application, including resorts, island communities, municipal water supplies, and industrial facilities.

MCI WET selects the pumps, membranes, materials, and energy-recovery technology that best fit each project. Super duplex stainless steel piping is fabricated and control panels are built in-house in Dallas, supporting consistent quality, lower lifecycle costs, and single-source accountability.

Super Duplex Stainless Steel
In-House Pipe Fabrication
MCI-Built Control Panels
UL-Listed Power & Controls

Designed for Reliable Seawater Desalination

Long-term seawater desalination performance depends on proper system sizing, efficient energy recovery, and materials designed for high-pressure saltwater service. MCI WET engineers each SW Series system around these requirements.

Engineered for Your Water Source

MCI WET designs each system around source-water analysis, site conditions, and required capacity. SW Series systems range from 25,000 to 500,000 GPD and can be configured for open-ocean intakes or beach wells. Each complete system is run and tested before shipment.

Energy Recovery for Lower Operating Costs

Energy recovery can reduce consumption from more than 24 kWh to as low as 8.1 kWh per 1,000 gallons. MCI WET selects pressure exchangers, turbines, and pumps based on daily production, local power costs, and maintenance priorities.

Built for High-Pressure Seawater Service

Schedule 10 super duplex stainless steel piping supports seawater service at pressures up to 900 psi. Standard clean-in-place and post-shutdown flush systems help limit fouling, protect membranes, and support reliable long-term operation.

Seawater Systems Manufactured In-House

Fabrication, controls, assembly, and testing are handled in Dallas.

MCI WET manufactures key components of its seawater desalination systems at our Dallas facility. Robotic welding and bending support consistent fabrication, while super duplex stainless steel piping and powder-coated, marine-grade aluminum frames are selected for corrosive seawater environments.

UL-listed control and power panels are engineered and built by MCI. Each complete system is assembled and tested before shipment, supporting consistent quality and single-source accountability throughout the project.

Super Duplex Piping
Marine-Grade Aluminum Frames
MCI-Built Control Panels
Robotic Welding & Bending

Product Specs

  • Capacity
    25,000 to 500,000 GPD
  • Feed Water Source
    Open ocean or beach well, up to 38,000 ppm TDS
  • System Recovery
    35 to 45%
  • Energy Recovery
    Pressure exchanger or turbine, selected per application
  • High Pressure Pump
    Positive displacement or multi stage centrifugal
  • High Pressure Piping
    Schedule 10 super duplex stainless steel
  • Low Pressure Piping
    Schedule 80 PVC
  • Frame
    Aircraft grade aluminum with marine grade polyurethane coating
  • Controls
    Allen-Bradley PLC with touch screen HMI
  • Control Panel
    Skid mounted NEMA 4X low voltage
  • Power Panel
    Stand alone NEMA 12 high voltage with VFD enclosure
  • Prefilter
    FRP five micron
  • Clean In Place (CIP) System
    Standard
  • Post Shutdown Product Water Flush
    Standard
  • Comprehensive Factory Testing
    Standard
  • Minimum Feed Pressure
    35 PSI (2.4 bar)
  • Operating Temperature
    59 to 95°F (15 to 35°C)
  • Average System Flux
    9.5 to 10.4 GFD
  • Maximum SDI / Turbidity
    3 / 1 NTU
  • Instrumentation
    Permeate and concentrate paddlewheel flow meters Feed and permeate conductivity Pre-filter, post filter, membrane feed and concentrate pressure gauges Pump suction and membrane feed pressure switches
  • Optional Features
    Multi media filters Pretreatment and posttreatment chemical feed systems Feed pump and transfer pump stations SCADA system Containerized

READY TO MOVE FORWARD?

Build the Right Desalination System

Share your source-water analysis, required capacity, site conditions, and operating goals. MCI WET will engineer a complete seawater desalination solution for reliable, efficient long-term operation.

START YOUR PROJECT